Overclocking your Computer is not as hard as is seems. The idea (if you don’t know what overclocking is) is to make your Computer run at a faster rate. For example if you have a 1,4 GHz Computer you could probably overclock it easily to 1,5 or 1,6 GHz. The latest processors are advertised as being clock locked but there are always ways to overclock them (through FSB for example), especially if you are an enthusiast.

There are many methods to overclock your Computer and in this article I will refer to the most popular:

Caution: Be careful when using any of the following methods. You run the risk to go over the limits. Take some advice from an expert or have him perform the overclocking procedure for you, if possible. Also, make sure you buy and install a heatsink or an additional fan for obvious reasons. Last but not least, install a benchmarking utility that will show you how much speed you’ve gained.

Altering the Computer’s Bus Speed

When the Computer Bus Speed increases, it makes the whole system run faster. Bus Speed defines the speed that the motherboard and other system parts run at. You can use this method and the next one together to achieve faster speed.

Altering your Computer Multiplier Settings

Multipliers are located on your Motherboard in the form of x1, x2, x3 etc. The Bus Speed is multiplied by these numbers giving the Computer speed. For example if you have a Bus Speed of 200 and a multiplier of x2, then the Computer speed is 400 MHz. Simple. Increasing the multiplier results in faster Computer speed.

Overclocking your Computer through BIOS

Most BIOS systems have the option to change your Computer speed. This is the easiest method since it’s all done on your screen. When booting, enter your BIOS and look for that option to alter Computer speed or voltage. Then just change the values and see the results.

Playing with the jumpers

This requires opening your computer case. Always have your motherboard’s manual handy. Carefully read the manual to see how you should fit your jumpers for each Computer speed. Change their position in order to alter the bus and multiplier settings and achieve higher speed.

Using overclocking software for your Computer

This is another easy method and it is highly recommended. Go online and search for the term -Overclocking software-. You will discover many programs. I can’t recommend any specific software; you have to climb that cliff on your own. After you download and install the overclocking software, it’s as easy as using the interface to alter Computer speed. Before proceeding, make sure you read the software help files and instructions.

If you would like a step by step method on how to explode your PC’s performance and triple its speed then I’d recommend checking out this cool site:

CPU overclocking guide

This is the REAL DEAL and it’ll show you the insider secrets on how to unleash hundreds of dollars of performance without spending a single cent on hardware!

Check it out here —> Secret CPU overclocking guide Site