12 Responses to Coolermaster Elite 430 i5 760 4ghz Cable Management and Lighting Overview i3 i5 i7

1. djdopebeetas says:

   June 13, 2011 at 2:16 pm

   @PeterEdinx sure did

   Reply
2. PeterEdinx says:

   June 13, 2011 at 3:24 pm

   Wait you used 2 cathodes to make it that bright?

   Reply
3. djdopebeetas says:

   June 13, 2011 at 4:32 pm

   @rabihdon06 You can connect the fan to molex on the PSU using a 3-pin to 4-pin molex adaptor.

   Reply
4. Bombo503 says:

   June 13, 2011 at 5:40 pm

   Thanks mate!
   You gave me heeps of useful tips about where to place the cables. I didn’t even know they could be placed their. Lol. Thanks

   Reply
5. ezio1462 says:

   June 13, 2011 at 6:48 pm

   @djdopebeetas Awesome! Thanks for the advice, I didn’t know about fan headers but I do now =D

   Reply
6. djdopebeetas says:

   June 13, 2011 at 7:56 pm

   @ezio1462 That’s right pal. If you need to use more fans and run out of fan headers you can connect the fans to a molex, either way they will power the fans.

   Reply
7. ezio1462 says:

   June 13, 2011 at 9:04 pm

   @djdopebeetas That’s right, I remembered that right after I posted lol I’ll take another glance at my board for them. These will supply power to fans as long as the motherboard is functioning correctly, right?

   Reply
8. djdopebeetas says:

   June 13, 2011 at 10:12 pm

   @ezio1462 You’ve got the AMD board mine is a Intel. You should have about four fan headers on the board. They are 3 or 4pin connectors, you can’t miss them.

   Reply
9. ezio1462 says:

   June 13, 2011 at 11:20 pm

   @djdopebeetas So you’re not using a molex connector for the fan? And where is the fan header located on your mobo? I think we got the same one, My Asus M4A79XTD Evo just arrived in the mail today and yours looked very similar to it in the video. lol

   Reply
10. djdopebeetas says:

    June 14, 2011 at 12:28 am

    @ezio1462 The cathodes come with the junction box and molex power connector, and also the switch.
    The LED fan is just connected to a fan header on the motherboard, that’s how it gets it power.

    Reply
11. ezio1462 says:

    June 14, 2011 at 1:36 am

    Great video man, thanks =) So how do you power the cathodes? Did you have to purchase that Junction box separately? Can you just use molex connectors? Also, to pwer your LED fans, it just takes one molex pin right? It doesn’t take two because of their LED’s?

    Reply
12. juzio1993 says:

    June 14, 2011 at 2:44 am

    thanks dude

    Reply