Check out this *secret* site where it’ll show you a cool trick that actually TRIPLES your PC’s performance… Plus tons more!
The Ultimate CPU Overclocking Guide!
I made a ton of videos showing a bunch of other stuff about my hardware… but it was just too much to sort through. Consider this my official follow up video. Ive installed my Scythe Mugen 2 Rev. B cooler as i was saying i would.
Incoming search terms for the article:
- dh67gd overclock
- DH67GD overclocking
- powered by SMF 2 0 toms hardware video
- overclock DH67GD
- intel dh67gd hackintosh
- dh67gd hackintosh
- 4 7 ghz stable i5 2500k
- overclocking 2500k with dh67gd
- overclocking the intel dh67gd
- overclocking i5 past 4 5 ghz
- overclock with dh67gd
- AMD Phenom X3 4 81GHz
- intel dh67gd overclocking
- i5-2500K @ 4 7 GHz!)
- i5 hackintosh overclock to 4 7
![How to overclock i7 2600k to 5Ghz - Air cooled [ Not for 24/7 use ]](http://i.ytimg.com/vi/T82lm6DRKOs/default.jpg)
![#39 [overclock] - i7 2700k @5.4Ghz 1.45v](http://i.ytimg.com/vi/P-2cwKdeku4/default.jpg)
![#60 [overclock] - i7 2700k @5.78Ghz](http://i.ytimg.com/vi/9VBwtAzuMPA/default.jpg)
I’d recommend you spend 20 more for the scythe mugen 2. The hyper212 is amazing for the price, but still lacks compared to the other 2. I think 4.5 is doable on a hyper 212 though
@Superloser89 how bout the Coolermaster hyper 212, its super cheap and CM usually makes good stuff(i own a HAF-912)
@clondan1
I’d recommend the noctua or the scythe mugen II B over the H50, high end air coolers still give better performance over an all in one water block.
i replaced my corsair H50 water cooler with the noctua nh d14 cooler for my i5 2500k and can recommend it as long as it fits in your case and clears your ram ok.
@leezaal how would H50 compare to that cooler
@Superloser89 they just had a old version of CPUID that reports voltage at 1.2
i spilled my self with drink when i saw the title..
@liam666cob 7.7, 7.9 doesn’t seem too easy to achieve.
what is your windows experience index score at for cpu?
@ImperviousMason
I’ve seen 5ghz on 1.2, now THAT’S a golden chip if you ask me lol. After all the initial excitement, I’m seeing a lot more 5ghz OCs pop up. Pretty cool.
I got mine to 4.7 @ 1.375v
I know someone who got a golden chip who has 4.9 @ 1.39v
4.7ghz should be super stable with either the 2500k or the 2600k provided you have a good cpu cooler like say a noctua nh d14. a bios update could really help with overclocking too as some of the higher 1155 cpu overclocks i’ve seen have only been possible via a bios update
@Superloser89 Damn! I dont know how to overclock
i wana overclock my i5 2500k so its 4ghz
@xLycosax I’d set the multiplier to 40 and vcore to ~1.25. Stress test it with prime for about an hour.
@siang108 yeah guide me too superloser89. i will buy i5 2500k but i want to know what is good eneough uh….. cooler cpu so i can get 4ghz
Please tell me what would be nice overclocking cooler for i5 2500k 4x 3.30ghz… i wana get it to 4.0ghz im new to overclocking
may i know how u overclock it ?recently i bought i7 2600k 3.4ghz , but i don’t know how to oc..my motherboard is intel DH67GD , can u guide me ?
i guess i pushed mine to the max too at 4.7ghz . asus p8p67 pro – my volt was at 1.42 @ 4.7 ghz. was hoping there was a way to get it beyond that.. sigh .. thanks for the post , and i did prime 95 for 30 min seems fine
@cdbob
Yeah, these seem to be all over the place with OC. I wish I didn’t have to keep my voltage so high, but any less and I start to get unstable after about a day of stress.
I’d say 4.6 on 1.24 is a pretty nice sweetspot though.
I maxed my 2500k out at 4.81Ghz @1.34 volts, I ran benchmarks on it for about 2 hours with Intel Burn Test and Prime, and about 5 minutes after finishing them my system proved to be unstable. I lowered to the clockspeed to 4.6GHz @ 1.24 volts, and now it’s perfectly stable. These chips are real stonkers. Nice Oc by the way, voltages are a bit high; but 59 Degrees max is a great place to be.
yes i know thanks !
wow ! but i have a Question i do to my i3 540 OC and i past the 4.00GHZ but i went more ,i have too the mugan2 so i ask you did you know how much vcore and timing for 4.30GHZ ?
my room temp is around 25c and my temps peaked after 3 hours of prime at 61 across all cores.
Vcore is about 1.36, I happen to have gotten a chip that didn’t clock so well on low voltage =(
what is the temps ? and v vcore ?