Overclock Intel i5 750 @4.0Ghz w/ New G.Skill Trident 2000MHz RAM, Microsoft LifeCam VX-5000


Check out this *secret* site where it’ll show you a cool trick that actually TRIPLES your PC’s performance… Plus tons more!

The Ultimate CPU Overclocking Guide!
An Update on the system with new G.Skill Trident DDR3 2000MHz EXxtreme RAM with a Brand New Kingston HyperX Ram Cooler. The system is Overclock @4.0Ghz and I am running an ATI Radeon 5850 OC as well to 9001200 from 7751100. Ive Super Lapped the Corsair H50 for 6 hours until it was really thin and temps decrease on an overclock of 4.2Ghz at 39, 41, 41, 40. System SpecIntel Core i5-750 Lynnfield 2.66GHz 8MB L3 Cache LGA 1156 Overclock to 4.0GHz AZZA Solano 1000 BlackJapanese Full Tower Case NZXT Sentry LX Aluminum dual bay fan controller Corsair H50 CPU Water Cooler (Super Lapped) GIGABYTE GA-P55-USB3 LGA 1156 Intel P55 USB 3.0 250GB HD SATA (Primary) 500GB HD SATA (Secondary) LG Super Multi DVD Writer (SATA) G.Skill Trident 2000MHz DDR3 Extreme Performane 9-9-9-27 1.65V With Kingston HyperX Ram Cooler Sapphire Radeon HD ATI 5850 HD 1GB GDDR5 256Bit Overclock with MSI Afterburner 9001200 Xigmatek 650 Modular PSU 5.1 Surround Logitech Speakers Power supply 7 UV LED Light and responsers Category:

Incoming search terms for the article:

25 Responses to Overclock Intel i5 750 @4.0Ghz w/ New G.Skill Trident 2000MHz RAM, Microsoft LifeCam VX-5000

  1. bebophgp says:

    Tired of laggy and slow PC Gameplay? – Learn how tweak special settings and add huge performance to your games – Get the guide free from tyreus {dawt} net

  2. ImmortalUniverse says:

    @keiki646
    ok ,thnx man

  3. keiki646 says:

    @ImmortalUniverse Can’t compare a i3 dual core with HT with a i5 750 Quad Core
    They already did the compare test and Quad Core won

  4. ImmortalUniverse says:

    @keiki646 but hes right , you need to put the fan against the case , and the radiator on the insiide of the case.

    the ait intake is alright , you just need to flip the fan and the radiator

    this way the air first goes trew the fan and then pushes trew the radiator ,
    it will give better air ill bet.

    the pump should always get full power too.12 v
    but il bet you already did that.

  5. ImmortalUniverse says:

    @keiki646 warranty decreased to by 3 years .

    lol
    sorry im kidding , ill bet it runs great .
    i build a i3 530 budget pc for a friend , and that little bastard cpu is running like a super engine .

    so ill bet the i5 does great too.
    still too bad this 1 doesnt have hyper treading .
    you think this 1 will be faster and better the the duo core i5 650 with hyper treading .

    im still wondering
    because the two are totally different .

  6. airsofter521 says:

    @airsofter521 laughing in relation to the fact im asking a retarded question not laughing at you lapping your stuff

  7. keiki646 says:

    @airsofter521 And your reason on why you are laughing is because???
    I lapped the CPU Nickel Plate off the CPU?? I think you need to research the reason why I did such a thing before laughing at something you don’t know why you are laughing about.

  8. airsofter521 says:

    @keiki646 sorry im going to sound retarded right now but you lapped the cpu or the thing on top of it haha XD

  9. keiki646 says:

    @airsofter521 Yes temps decrease by 3c

  10. airsofter521 says:

    when u lapped the h50 did u see any improvement in temps in wondering cause if so i will do the same haha

  11. NEWBLOODDD says:

    nice :)

  12. Trubyd44 says:

    @keiki646 Oh, I didn’t mean to say you were wrong. In my mind I was thinking pressurized air (having more air molecules per unit volume) would give you better heat transfer then pulling a partial vacuum through the radiator. It probably is marginal anyway. I’m sure your lapping work would have much great effect on cooling. I need to watch that video in a bit. Thx!

  13. keiki646 says:

    @Trubyd44 I think you are looking at it all wrong now. I have the fans on the H50 intaking air. Plus it work fine for me. Also I super lapped the H50 and made the plate very much thinner

  14. Trubyd44 says:

    @keiki646 Good. The H50, why did you choose to put it in a suck position? It is good that you are sucking air inside of the case, but why did you not put the fan on the other side of the radiator where it would be pressurized through the fins as opposed to pulling a vacuum? Just a thought. I owned the H50 and loved it, and I had mine the other way.

  15. keiki646 says:

    @Trubyd44 Xigmatek

  16. Trubyd44 says:

    Love the air cooling, very clean build. What PSU is that?

  17. keiki646 says:

    @TylertheGeek28 Thank you

  18. TylertheGeek28 says:

    looks good, nice work

  19. keiki646 says:

    @wickedout2010 thanks

  20. wickedout2010 says:

    Looks great. Keep up the great work and overclocking.

  21. keiki646 says:

    @2Mrcooler Going to attach a new 3DMark and Vantage Score Video right now

  22. 2Mrcooler says:

    nice video man 55

  23. marland66 says:

    Nice! Keep the vids coming!

  24. keiki646 says:

    @irgoto I have a information box here where there is a arrow pointing down next to the views. The information is there. I am running a 5850 O.C to 900/1200

  25. irgoto says:

    what ati card u running?

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>