Check out this *secret* site where it’ll show you a cool trick that actually TRIPLES your PC’s performance… Plus tons more!
The Ultimate CPU Overclocking Guide!
After reading on a lot of forums people having problems with ocing asrock boards i decided to put this video together. Let me say i am no expert at overclocking but i do know how to oc this chip and board. I have seen another video on here but it wasnt very clear so this is my attempt. forums.overclockers.co.uk
Related Blogs
- Related Blogs on Overclocking i7 2600k Using an Asrock Fatal1ty z68 motherboard
Incoming search terms for the article:
- fatality z68 overclocking
- asrock z68 i2600k übertakten
- 2600k oc on asrock fatality z68
- overclocking i2700k and asrock z68 fatality motherboard over 5ghz
- best oc settings i2700k asrock
- asrock fatal1ty p67 and overclocking intel core i7 2600k
- how to overclock i7 in asrock
- hackintosh asrock z68 fatal1ty
- hackintosh asrock fatal1ty z68
- fatality z68 overclocking guide
- how to overclock in falaity z68 motherboard
- i2600k overclocking z68
- i7 2600k overclocking z68 board
- k2500 asrock oveclocking bios settings
- overclocking 2600k z68 fatality
- overclocking a 2600k on a asrock fatality bord
- overclocking i2600k on asrock p67
- tutorial overclock en fatality
- 1155 fsb overclocking z68
- fatality z68 oc 2600k
![How to overclock i7 2600k to 5Ghz - Air cooled [ Not for 24/7 use ]](http://i.ytimg.com/vi/T82lm6DRKOs/default.jpg)
![#39 [overclock] - i7 2700k @5.4Ghz 1.45v](http://i.ytimg.com/vi/P-2cwKdeku4/default.jpg)
![#60 [overclock] - i7 2700k @5.78Ghz](http://i.ytimg.com/vi/9VBwtAzuMPA/default.jpg)
@Buzzlightweightuk i have a Zalman CNPS 10X Extreme with full tower thermaltake armor case with a few more added case fans temps are quitre low i gamed at 5ghz in crysis for a while and it hit 50′s top just cant get it stable though will blue screen its possiable it might be my ram though….
@Buzzlightweightuk damn keep running into stable problems i cant get 5 ghz stable even a 1.5v 3.7ghz seems pretty rock solid at 1.4 i have a problem when i run intel burn test once tghe core temps rech 65c it throttles down the cpu to only like 3.6ghz why is it doing this i have changed evrything you have and yurned temp protection off another problem for me i think i have a faulty stick of ram its supose to run 2133 9-11-10-28 but it only stable with 1600 11-11-11-28 think you could help please
hi mate is 5ghz/ 1.45v good for 24/7 or should i lower it to 1.39 4.7ghz 24/7?
@Buzzlightweightuk Thanks for the advice. I have to running at 5Ghz at the moment on 1.456v. It idles in the mid to high 30′s and reaches high 70′s during gameplay. Prime95 pushes it to about 84 degree’s. At the moment I can’t push the memory over 1600 without a BSOD even though it is rated for 2133. I’m still playing with the settings though trying to find that optimal setup. Your guide helped a lot though so thanks.
@diddler1979 i would not try for 5ghz unless i will rocking a noctua nh d-14 i would step back to 4.7/8
@Buzzlightweightuk Ok, just set my settings to the same as yours in the vid and now seems to be sticking to 5Ghz on prime. My temps are hitting the 80′s though so will prob drop it back. I’m currently using a Noctua NH-U12P cooler with two 120mm fans set to push/pull.
Tried doing some 3DMark benchmarks and they complete successfully but the CPU score is always way down on my old i7 920 OC’d to 4.2Ghz. It’s like the 2600k is defaulting to stock during these benchmarks.
@diddler1979 you need to enable speed step and change the values to between short 180-230 long 140-200, or it is your chip thermally throttling. what temps are you hitting? what cooler are you using?
Very nice video mate. I have pretty much exactly the same system (CPU & mobo at least) and this helped me hit 5Ghz.
Question though, have you noticed that when running something like 3DMark or Prime95 the CPU is throttling back to 3.8Ghz?